Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Switching off
^
Press and release the I-0 button.
^
Turn off the stopcocks.
Cancelling a programme
A programme can only be cancelled
in operating level B or D.
When testing to EN ISO 15883 or
HTM 2030 standards, the
programme must not be interrupted
or cancelled.
In operating levels B or D
^
Press the Stop button 7.
The programme is interrupted.
CANCEL or üCONTINUE< will appear
in the display.
,
With established
decontamination programmes any
contaminated water must be
decontaminated using a disinfecting
agent before it is discharged into the
sewerage system . The door on the
unclean side of the machine can be
opened to do this.
^
Use cursor 1 to select üCANCEL<,
the ü < cursors will start flashing.
^
Press the Start button 6. The
programme is cancelled and the
water pumped away.
DRAIN WATER appears in the display.
^
After the water has been pumped
away the required programme can
be selected and started again.
Operation
37