Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Cleaning the spray arms
The spray arm jets can get blocked by
particles inside them.
The spray arms should, therefore, be
checked daily.
^
Use a sharp pointed object to push
particles into the spray arm jets, and
rinse well under running water.
Remove the spray arms as follows:
^
Take any mobile units out of the wash
cabinet.
Spray arms in the wash cabinet:
^
Use an SW 60 spanner to loosen the
connection and then pull the spray
arm upwards or downwards.
Spray arms in mobile units/modules:
^
Turn the nut (left hand thread)
together with the spray arm
clockwise and then pull the spray
arm downwards and off.
^
After cleaning the spray arms screw
them back into position.
After replacing the spray arms rotate
them to make sure they move freely.
Maintenance
44