Operating instructions
Table Of Contents
- Contents
- Description of the machine 4
- Guide to the machine 6
- Warning and safety instructions 11
- Opening and closing the door 16
- Automatic mobile unit recognition (Optional) 17
- Areas of application 21
- Dispensing liquid chemical agents 30
- Operation 34
- Data transfer 39
- Maintenance 40
- Periodic checks 40
- Process validation 41
- Routine checks 41
- Cleaning the filters in the wash cabinet 42
- Sprüharme reinigen 44
- Cleaning the control panel 45
- Cleaning the front of the machine 45
- Cleaning the wash cabinet 45
- Cleaning the door seals 45
- Protein test 45
- Mobile units, modules and inserts 46
- Printer (optional) 47
- After sales service 48
- Converting the type of heating 49
- Electrical connection 50
- Plumbing 51
- Technical data 52
- Special features - OXIVARIO 53
- Disposal of your old appliance or machine 55
Mobile units, modules and
inserts
Mobile units, modules and inserts
should be checked daily to make sure
they are functioning correctly. The
washer-disinfector is supplied with a
check list.
The following need to be inspected:
–
Check that rollers on mobile units/
inserts are free of hindrance and that
they are secure.
–
Check that the mobile unit connector
is at the correct height and screwed
on correctly.
– Check that jets, sleeves and hose
adapters are securely held in
position in mobile units/inserts.
– Check that wash liquor can flow
unhindered through all jets, sleeves
and hose adapters.
– Make sure caps and closures on
sleeves are correctly located.
and where applicable:
–
Make sure that the spray arms rotate
freely.
–
Make sure the spray arm jets are free
of any blockages. See "Cleaning the
spray arms".
–
Make sure the magnetic strip on
mobile units with automatic mobile
unit recognition is correctly screwed
into position.
Maintenance
46