Operating instructions

For future servicing, be sure to document any changes made to the standard

factory settings.

Enter the information in the field(s) provided.

General information:

–

Program selector positions that have no assigned function are represented by a

bar ( - ) in the middle of the display.

–

To call up the programming level, use the 12 o'clock position f.

The status E.. will appear in the display.

–

Any program or dosing changes in connection with the preparation of medical

devices must be documented. In such cases, the washer-disinfector results

(cleaning and/or disinfection) will need to be re-validated.

The following instructions apply to all programming functions:

Activate the programming mode

^ Turn the program selector to the

12 o'clock position f.

^ Turn off the machine.

^ Simultaneously press and hold the

"Display" ß and "Start" 6 buttons,

while turning on the machine by

pressing the "ON/OFF" button.

The current program status P.. appears

in the display. The "Fill/Drain" indicator

lights up.

Saving to memory and exiting the programming mode

Press the "Start" 6 button.

SP appears in the display.

Press the "Start" 6 button again.

The change will now be stored in the

memory.

Exiting the programming mode without saving

Use the "ON/OFF" button to turn off

the washer-disinfector.

The change is discarded.

Programmable functions