Operating instructions

DOS 1 dispensing (detergent)
Setting the liquid detergent dispensing concentration
The dispensing concentration only needs to be set for liquid detergents. Set
the concentration according to the detergent manufacturer's
recommendations. Do NOT change the setting if you are using powder
detergent in the door dispenser.
Step Display / Result
^
Activate the programming mode as
per page 35.
^
Press the "Drying" 0 button until E02
appears in the display.
E02
^ Turn the program selector to the
"Wash" program.
Without DOS Module?
With DOS Module?
10 = 10 sec dispensing time
1.00 = 1.0 % dispensing concentration
^ Press or hold down the "Display" ß
button until the desired value appears
in the display, e.g., 0.50.
0.50
The dispensing time / dispensing
concentration is now set.
^ Save to memory and exit programming
mode as per page 35.
Dispensing concentration setting:
Setting Dosage
.10 20 ml
.20 30 ml
.30 40 ml
.40 50 ml*
.50 60 ml
.60 70 ml
.70 80 ml
.80 90 ml
.90 100 ml
1.0 110 ml
* Recommended dosage for neodisher FA
Programmable functions
36