Operating instructions

Priming the liquid detergent dispensing system
The dispensing system does not need to be primed (cleared of air) unless:
– the dispensing concentration is being set for the first time,
– the liquid detergent container was not refilled in time and became completely
empty.
Step Display / Result
^
Activate the programming mode as per
page 35.
^
Press the "Drying" 0 button until E02
appears in the display.
E02
^
Turn the program selector to the 1 o'clock
position.
d§1
^ Press the "Display" ß button.
The dispensing system will be
primed automatically. Priming is
complete when 0 appears in the
display.
^ Save to memory and exit programming
mode as per page 35.
^ Select the "Rinse" program and "Start" 6
button to run a rinse cycle.
This will rinse away any agents that
entered the wash cabinet after
priming.
Programmable functions
37