Operating instructions

This appliance complies with all
applicable safety laws and
regulations. However, inappropriate
use can result in personal injury and
property damage.
Read the operating instructions
carefully before using this machine.
This will help keep you safe and
avoid damage to the machine.
The manufacturer cannot be held
responsible for damage caused by
non-observance of these Important
Safety Instructions.
Keep these instructions in a safe,
accessible location and pass them on
to any future user.
Proper use
~
This machine is not intended for any
purpose that is not indicated in the
operating instructions. Conversions,
modifications and other unintended
uses are considered to be dangerous.
The cleaning and disinfection
processes described here apply only to
those items that are specifically
designed by the manufacturer to be
re-used. Always follow the product
manufacturer's instructions. Only clean
items which are stated by the
manufacturer as being suitable for
cleaning and disinfecting in this type of
machine. Miele will not be held liable
for damage caused by incorrect use of
any kind.
~
This machine is intended exclusively
for use in interior locations.
~
The appliance is not designed for
use in non-stationary locations (for
example, on ships). However, this use
may be possible if a qualified specialist
determines that the appliance can be
used safely in the location in question.
To avoid injury, please follow these
instructions!
~
This machine should only be
installed, maintained and repaired by a
Miele-authorized service technician.
Work performed by unqualified persons
can place the user at considerable risk
of harm.
~
Do NOT install the machine in an
area where there may be the danger of
explosion or freezing.
~
The electrical safety of this
appliance can be ensured only when it
has been properly grounded in
compliance with applicable safety
regulations. It is imperative that this
basic safety requirement be met. In
case of doubt, have the electrical
system checked by a qualified
technician.
The manufacturer will not be held liable
for damages resulting from an
inadequate grounding system (e.g.
electric shock).
Safety instructions and warnings
5