Operating instructions

Table of settings
mmol/l or
°d
mmol/l °f Value
displayed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
0.2
0.4
0.5
0.7
0.9
1.1
1.3
1.4
1.6
1.8
2.0
2.2
2.3
2.5
2.7
2.9
3.1
3.2
3.4
3.6
3.8
4.0
4.1
4.3
4.5
4.7
4.9
5.0
5.2
5.4
5.6
5.8
5.9
6.1
6.3
2
4
5
7
9
11
13
14
16
18
20
22
23
25
27
29
31
32
34
36
38
40
41
43
45
47
49
50
52
54
56
58
59
61
63
0 *)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 **)
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
*) The "0" setting is only for machines which do
not have a water softener
**) Factory setting
Setting the water softener
^
Switch off the machine with the Z
button.
^
Press and hold A and 6 at the
same time and, whilst doing so,
switch the machine on with the On
button Y.
The current programme status "P..."
will show in the display.
The indicator light p will come on.
^
Press button y once. 1 will appear
in the display (Programming level 1).
^
Press button z once.
1.01 will appear in the display.
^ Press button A once. The water
hardnesss level set will appear in the
display, e.g. 19. This is the factory
default setting of 19 °d (3.4 mmol).
^ Press A as many times as
necessary, or hold it in until the
required value (hardness level in °d)
appears in the display.
Once the number 35 has been
reached, the counter will begin again
at 0.
^
Press 6. SP will appear in the
display.
^
Press 6 again. The setting will now
be stored in the memory. The
machine is no longer in programming
mode.
Water softener unit (optional)
17