Operating instructions

5.2 Altering the programme duration
for the STANDARD programme
^
Call up Programming level 6
(see 5.1).
Then, or if you were already in
Programming level 6, set the
programme duration as follows:
^
Press the z button repeatedly until
6.02 appears in the display.
^
Press A once. The current
programme duration will appear in
the display, e.g. 120. The factory
default setting is 120 seconds (120).
^ Press A repeatedly or hold pressed
in until the programme duration you
want appears in the display. The
duration is set in 5 s stages.
Proceed to step 5.4 if you do not want
to make any other changes to settings
in this programming level.
5.3 Altering the programme duration
for the INTENSIVE programme
^
Call up Programming level 6
(see 5.1).
Then, or if you were already in
Programming level 6, set the
programme duration as follows:
^
Press the z button repeatedly until
6.03 appears in the display.
^
Press A once. The current
programme duration will appear in
the display, e.g. 180. The factory
default setting is 180 seconds (180).
^ Press A repeatedly or hold pressed
in until the programme duration you
want appears in the display. The
duration is set in 5 s stages.
Proceed to step 5.4 if you do not want
to make any other changes to settings
in this programming level.
5.4 To save your changes
^
Press 6. SP will appear in the
display.
^
Press 6 again. The alteration is now
saved.
^
Switch off the machine with the Z
button.
Programming special functions
41