Operating instructions

Operating Instructions
Busch-ComfortTouch
®
Operation
Operating Instructions | 1473-1-8041 — 13 —
Pos: 15.2.9.1 /Lay out bis 2014-11-11/Online- Dokumentation ( +KNX)/Überschri ften (--> Für alle Dokumente <--)/3. Ebene/S - T/Status leiste @ 34\mod_136179016 8538_15.docx @ 282027 @ 3 @ 1
5.1.4 Status bar
Pos: 15.2.9.2 /Lay out bis 2014-11-11/Online- Dokumentation ( +KNX)/Bedienung/K NX/KNX-Aktorik/Comfor tPanel 3.0/Bedienu ngsanleitung/Grund lagen/Statusleis teStatusleiste @ 40\m od_1418725921684_15.d ocx @ 309564 @ @ 1
Fig. 5: Status bar (Example)
The status bar displays information about your Busch-ComfortTouch
®
with the aid of icons. Applications and
functions can also be called up and activated directly by pressing the icons.
The following list shows a selection of important icons that can be displayed in the status bar (additional symbols
are available).
Icon Description
Displays the current date
An option opens when pressing the date. Here the "Date settings" can be selected.
Additional date-relevant functions are available for selection depending on the activation. The functions
are described in greater detail in section "Explanation of functions".
Displays the current time
An option opens when pressing the time. Here the "Time settings" can be selected.
Additional time-relevant functions ("Alarm clock" and "Timer") are available for selection depending on
the activation. The functions are described in greater detail in section "Explanation of functions".
Depending on the setting, it displays the current room temperature or outside temperature, as
well as the current operating mode of the local room temperature controller
Displays the current room temperature or the outside temperature, as well as the current operating
mode of the local room temperature controller via different icons. With a press on the temperature the
local room temperature controller opens. This function is described in greater detail in section
"Explanation of functions" -> "Room temperature controller".
1
2
When you touch the pin [1], you can hold the screen view since your Busch-ComfortTouch
®
switches
to the start screen after the expiry of a time interval. After the activation the icon looks like icon [2].
Indicates that the blocked application (access control) has been enabled
The message centre is displayed after pressing this icon
All currently received messages are displayed here. Also "Image message" and "Voice message" are
available for selection, calls (not accepted), e-mails or system messages. The icon appears brighter as
soon as a message is received. After the message is opened in the "Message centre" it is deleted from
the overview.
Note
When a message is received, a notice (with icons) appears via the "Message centre" icon indicating
the type of message received.