Operating instructions

Operating Instructions
Busch-ComfortTouch
®
Operation
Operating Instructions | 1473-1-8041 — 24 —
Value display elements / value sending elements (basic versions, which can be adapted further)
- With value display elements, values are displayed as text or graphical information in a page of the Busch-
ComfortTouch
®
. They cannot be operated (an exception is the slider value) and are only used to display
values.
- With value sending elements, you can display values in different formats in a Busch-ComfortTouch
®
page
and send them to other devices.
Control element State Function
Text display element The "Text display" version can display values and texts that
are sent, for instance, from a temperature sensor.
There are no direct control elements here!
Graphic display
element
The "Graphics display" version can display values
graphically, which are sent from a temperature sensor, for
example. The values are also displayed as a number. For
the graphic display element you can choose between a
wind rose and a dial-type gauge. This must have been
appropriately assigned in the project planning softwar of the
Busch-ComfortTouch
®
. Please contact your electrical
installer who will set up the Busch-ComfortTouch
®
for you
individually and according to your wishes.
There are no direct control elements here!
Value sending element With value sending elements, you can display values in
different formats (see above) in a Busch-ComfortTouch
®
page and send them to other devices.
With "Slider value" the slider can be used to change values.
The changed values are then sent. Text displays can be
made here. In this case, a corresponding text can be
displayed at the different slider positions.