Operating instructions

Operating Instructions
Busch-ComfortTouch
®
Operation
Operating Instructions | 1473-1-8041 — 53 —
Pos: 15.6.25.1 /Lay out bis 2014-11-11/Onli ne-Dokumentation ( +KNX)/Überschri ften (--> Für alle Dokumente <--)/3. Ebene/M - O/Meldeanlage @ 34\ mod_1361799170574_15. docx @ 283301 @ 3 @ 1
5.4.4 Alarm control unit
Pos: 15.6.25.2 /Lay out bis 2014-11-11/Online- Dokumentation ( +KNX)/Bedienung/K NX/KNX-Aktorik/Comfor tPanel 3.0/Bedien ungsanleitung/ Erläuterung der Funktion en/Meldeanlage Meldeanlage @ 40\mod_1418732 431076_15.doc x @ 309737 @ @ 1
The Busch-ComfortTouch
®
can monitor message circuits / contacts and display their status. This enables the
panel to monitor the security of the building and, if necessary, to transmit messages about unauthorized access.
For this purpose, movement detectors, glass break sensors, window sensors and further contacts can be
integrated.
Note
The alarm control unit is not intended to serve as a VDS-certified (German Association of Property
Insurers) alarm system but to merely offer the option of monitoring windows, doors or interior
rooms via movement detectors. It is no substitute for an alarm system.
The status of the alarm control unit is displayed in the status bar. The function is opened by pressing the icons.
The function can, however, also be called up via the navigation bar.
This icon indicates that the alarm control unit has been armed. When pressing the icon, a selection with "Disarm"
and "Open" is displayed.
This icon indicates that the alarm control unit has been disarmed. When pressing the icon, a selection with "Arm"
and "Open" is displayed.
The overview displays the available message circuits. By setting a tick under "Monitored" you can specify the
message circuits are armed when setting the alarm. The access code is required when setting the alarm. This can
be entered via the numbers keyboard which appears. The access code can also be changed (first the request for
the old access code -> "OK" -> then new entry -> "OK").