Operating instructions

Operating Instructions
Busch-ComfortTouch
®
Operation
Operating Instructions | 1473-1-8041 — 72 —
Pos: 15.6.43.1 /Lay out bis 2014-11-11/Onli ne-Dokumentation ( +KNX)/Überschri ften (--> Für alle Dokumente <--)/3. Ebene/G - L/IR-Fernbedi enung @ 34\mod_13618002138 33_15.docx @ 283472 @ 3 @ 1
5.4.13 IR remote control
Pos: 15.6.43.2 /Lay out bis 2014-11-11/Online- Dokumentation ( +KNX)/Bedienung/K NX/KNX-Aktorik/Comfor tPanel 3.0/Bedien ungsanleitung/ Erläuterung der Funktion en/IR-Fernbedienu ngIR-Fernbedienung @ 40\ mod_1418733370592_1 5.docx @ 309801 @ @ 1
The Busch-ComfortTouch
®
can be controlled via an RC5 or B&O capable remote control. To do this, the functions
of the Busch-ComfortTouch
®
are assigned to the buttons of the IR remote control. For this the available IR
functions are predefined in the Busch-ComfortTouch
®
by the electrical installer with the aid of the project
planning software. Programming of a new IR remote control is also possible on the device later.
1. Press the "IR remote control" icon in the navigation bar to access the function.
The functions suitable for the IR remote control are described on the left.
2. Press an entry in the list and then "Programming" to assign this function to the remote control.
A time of 5 seconds runs down.
3. To occupy the button with the respective function, press a button on the IR remote control during this time.
Point the remote controlg in the direction of the Busch-ComfortTouch
®
during this time. When this process is
successful, a tick appears in "Assigned".
4. Select an entry from the list.
The assignment can also be deleted at any time.
5. Then press "Reset".
When this process is successful, the tick is removed from "Assigned".
Pos: 15.6.44 /Layout bi s 2014-11-11/Onlin e-Dokumentation (+K NX)/Steuermodule - Online- Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1