Operation Manual

Switching on
^
Make sure the spray arms are not ob
-
structed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Press the "On/Off" button (15).
All the programme button indicator
lights (16) will light up and the
“Start/Stop” indicator light will flash.
Start the programme
^
To help you choose the right
programme, please read the
programme chart at the end of these
operating instructions.
^
Press button (16) for the programme
you want.
All indicator lights next to the
programme buttons, except the one for
the programme selected, go out.
The "Start/Stop" indicator light will start
flashing.
The running time of the programme se
-
lected appears in the time display (18)
in hours and minutes.
The “Time Left” indicator light comes
on.
Note:
The additonal functions "Delay start" or
"Top Solo" can now be selected if
wished (see "Additional functions ").
^ Press the “Start/Stop” button (21).
The “Start/Stop” indicator light will
come on. The programme cycle be-
gins.
Do not finish a programme prema
-
turely. Important programme stages
(e.g. reactivating the water softener)
could be omitted.
Glass care indicator light (14)
The green Glass care indicator light will
come on when you select a programme
that is suitable for glassware.
It will stay on for the duration of the
programme and go out at the end of
the programme.
Operation
32