Operating instructions Touchtronic Premier Plus To prevent accidents and machine damage, read these instructions before installation or use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS CONSIGNES DE SÉCURITÉ Caring for the environment Energy saving washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Guide to the dishwasher Wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Operation Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Running the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Program sequence indicator (14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Time display (18) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 At the end of a program. . . .
IMPORTANT SAFETY INSTRUCTIONS WARNING – When using your dishwasher, follow basic precautions, including the following: Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance. Use the dishwasher only for its intended purpose. This appliance is intended for residential use only.
IMPORTANT SAFETY INSTRUCTIONS This equipment is not designed for maritime use or for use in mobile installations such as caravans or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Technical Service Department with specific requirements. Inspect the dishwasher for shipping damage. Do not install or operate a damaged unit. Contact the place of purchase. Ensure that any plastic wrappings, bags etc.
IMPORTANT SAFETY INSTRUCTIONS When loading tableware, place sharp items away from the door seal to prevent damage to the seal. Load knives pointing downwards to prevent injuries. Only use detergents and rinse aids recommended for residential dishwashers. Keep all detergents and rinse aids out of the reach of children. Do not drink water from the dishwasher! Harmful residues could be present. For dishwashers with visible heating element Do not touch the heating element during or immediately after use.
CONSIGNES DE SÉCURITÉ AVERTISSEMENT – Au moment d’utiliser votre lave-vaisselle, prenez des précautions essentielles, dont : Lisez attentivement l’ensemble des consignes avant d’installer ou d’utiliser le lave-vaisselle afin de prévenir les blessures et éviter d’endommager l’appareil. Le fabricant ne peut être tenu responsable de dommages ou blessures causés par l’usage inapproprié de l’appareil. Tout usage inapproprié est déconseillé. Cet appareil est destiné à un usage domestique uniquement.
CONSIGNES DE SÉCURITÉ Installation L’installation et les réparations devraient être effectuées uniquement par un technicien de service autorisé Miele. Les travaux effectués par des personnes non qualifiées peuvent s’avérer dangereux et rendre nulle la garantie. , ATTENTION - Risque d’incendie Ne recouvrez et n’écrasez jamais la fiche d’un appareil électrique. Assurez-vous que dans l’espace occupé par le lave-vaisselle il y a suffisamment de volume libre pour la fiche.
CONSIGNES DE SÉCURITÉ Utilisation N’utilisez le lave-vaisselle que lorsque tous les panneaux sont bien en place. Ne jouez pas avec les commandes. Au moment de charger la vaisselle, ne disposez pas les articles coupants à proximité du joint d’étanchéité de la porte afin d’éviter de l’endommager. Placez les couteaux avec la pointe vers le bas afin d’éviter les blessures. Afin de diminuer le risque de blessures, ne laissez pas les enfants jouer près de l’appareil ni monter dedans ou dessus.
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in the use of water and electricity. For best results follow these tips: ^ For lowest energy consumption and the gentlest washing of china and crystal, connect the dishwasher to a cold water source. ^ For fastest possible wash times, yet higher energy consumption, connect the dishwasher to a hot water source. ^ Make full use of the baskets without overloading for the most economical washing.
Guide to the dishwasher Wash cabinet 1 Upper spray arm (not visible) 7 Four height adjustable feet 2 Cutlery tray 8 Triple Filter System 3 Upper basket 9 Salt reservoir 4 Water feed for the middle spray arm 5 Middle spray arm 6 Lower spray arm 10 Detergent dispenser 11 Rinse aid reservoir (with dosage selector) 12 Data plate 11
Guide to the dishwasher Control panel 13 Check/Refill indicators 19 Plus / Minus time buttons 14 Program sequence display 20 "Top solo" button 15 "On/Off" button 21 "Start/Stop" button 16 Program list / indicators 22 Child Safety Lock 17 "Time left"/"Delay Start" indicators 23 Door release 18 Time display 24 Drying vent Every dishwasher is tested before leaving the factory. Any water remaining in the machine is from these tests and does not indicate that the machine has been used.
Before using for the first time To open the door Child Safety Lock The yellow key for the Child Safety Lock is shipped on one of the spikes at the front of the upper basket. Remove the key before using the dishwasher. ^ Press the release catch inside the door grip. If the door is opened during operation, the dishwasher will stop running. Once the door is closed the program will restart. To close the door ^ Push the baskets in. ^ Lift the door and push until it clicks into position.
Before using for the first time Water softener To achieve good cleaning results, the dishwasher needs soft water. Hard water results in calcium deposits on dishware and in the dishwasher. If your tap water hardness is above 8 gr/gal (140 ppm), the water should be softened. This takes place automatically in the unit’s integrated water softener. – Your local water authority will be able to advise you of the water hardness level in your area.
Before using for the first time Filling the salt reservoir To fill the salt reservoir: If your water hardness level is greater than 8 gr/gal, the salt reservoir should be filled before the first use and when the "Salt" indicator lights. ^ Remove the lower basket. Only use water softener salt (1 - 4 mm) grain size; other salts may contain insoluble additives which can impair the water softener. ^ Unscrew and remove the salt reservoir cap. ^ Place the provided funnel over the salt reservoir.
Before using for the first time Salt indicator Bypassing the salt indicator When the salt reservoir is empty, the "Salt-PC" indicator will light, indicating that it should be refilled with reactivation salt. If your water is soft (below 8 gr/gal) the salt reservoir should not be filled with salt. The indicator will remain lit and should be disregarded or bypassed. ^ Remove the salt reservoir cap. Looking into the salt reservoir, you will see the top of the float chamber on the right hand side, a.
Before using for the first time Rinse aid Rinse aid is recommended to prevent spotting on dishes and glassware. ,Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir. Adding rinse aid ^ Pour liquid rinse aid into the reservoir until it is visible on the surface of the screen. ^ Press on the flap until you hear it click shut.
Before using for the first time Adjusting the dosage Rinse aid indicator The rinse aid indicator on the control panel will light when the rinse aid reservoir needs refilling. The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 1 to 6. ^ Use a higher setting if spots appear on dry glassware. ^ Use a lower setting if streaking appears on dishes or glasses.
Loading the dishwasher ,Do not wash items soiled with ash, sand, wax, grease or paint in the dishwasher. Ash and sand do not dissolve and will be distributed through out the inside of the dishwasher. Wax, grease and paint will cause permanent discoloration or damage to the dishwasher. ^ Scrape food from dishes before placing in the dishwasher. Do not rinse dishes. ^ The spray arms must not be blocked by items that are too tall or hang through the baskets.
Loading the dishwasher Items not recommended for dishwashing – Cutlery with wooden handles. – Wooden cutting boards. – Glued items such as old knives with handles glued together around the shank of the blade. – Hand made craft items, antique, metal trimmed or decorative glassware. – Lead crystal. – Copper, brass, tin or pewter. – Plastic items that are not heat resistant. – Dishes with color painted over the glaze. These dishes may fade over time. – Cast iron pots and pans.
Loading the dishwasher Cutlery tray (SC units) The removable cutlery tray makes unloading flatware easy. Simply carry the cutlery tray to where the flatware is stored and put the entire basket away in one trip. Spoon heads should be placed in contact with at least one of the serrated retainers of the cutlery tray to ensure that water runs off freely. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.
Loading the dishwasher Upper basket Adjusting the upper basket On select models, the upper basket can be raised or lowered to accommodate tall items. ^ Slide out the upper basket. Load the upper basket with small, lightweight, or delicate items such as cups, saucers, glasses, dessert bowls and flat pans. Long items such as soup ladles, mixing spoons and knives can be set across the front of the upper basket. ^ Pull up the levers at the sides of the upper basket and adjust the basket height.
Loading the dishwasher Adjustable cup racks Coffee bar Raise the rack to make room for tall glasses. Lower it to double stack smaller pieces. To allow water to run off the bottom of coffee mugs, place slanted on top of the coffee bar. The bar can also be used to separate two rows of glasses. To stack wide items, flip the bar to the right.
Loading the dishwasher Lower basket Height limit For larger and heavier items such as plates, serving platters, sauce pans, bowls. The guide at the front of the upper basket determines the maximum height for items placed in the lower basket so that the middle spray arm is not blocked. Stemmed glassware can also be placed in the lower basket when secured with the StemGuard.
Lower basket inserts Various removable inserts are available for the lower basket to accomodate special items to be washed. Removing an insert ^ To remove an insert, gently pull up on the handle. Inserting an insert ^ Slid the hitches of the insert under the vertical struts of the lower basket.
Lower basket inserts Foldable spike insert A highly flexible design holds tableware securely. It can be folded out of the way for pots, pans and other large items. This insert secures plates and platters. Foldable spikes Two rows of spikes can be folded down to create more room for larger dishware e.g. pots, pans and bowls. ^ Press on the yellow levers, a, to fold down the spikes, b. ^ Hook the foldable spike insert into the back right corner of the lower basket, the area marked in white.
Lower basket inserts Plateguard Plus with StemGuard This special attachment cradles delicate stemware. It can also hold teacups. ^ Place stems of glasses into the slots. Cups can be placed on top of the StemGuard. Never place items on top of glassware. ^ Lower the rack to place cups on top. Raise the rack to make room for tall items. ^ Hook the Plateguard Plus with StemGuard insert into the left half of the lower basket, the area marked in white.
Lower basket inserts Tall Glassware Insert for lower basket (select models) This insert for tall glasses holds glasses securely with the vertical supports. ^ Hook the glassware insert into the left or right rear of the lower basket, the areas marked in white. Vase / Bottle holder The bottle holder e.g. for milk or baby bottles, can be inserted into the bottom basket in more than one place. Position in any area marked white in the illustration.
Basket accessories Additional inserts for the upper and lower baskets may be purchased from your Miele dealer or the Miele Technical Service Department.
Operation Adding detergent ,Dishwasher detergents contain irritant and corrosive ingredients. Keep children away from detergent. Do not fill the detergent dispenser until you are ready to start the dishwasher. Only use powder detergents or tablets formulated for residential dishwashers. The use of gel or liquid detergent is not recommended. Never fill the detergent dispenser to capacity. Do not use more than the recommended amount of detergent. Continued use of too much detergent may cause machine damage.
Operation Running the dishwasher ^ Make sure the spray arms are not blocked. ^ Close the door. ^ Turn on the dishwasher. All progam indicators will light and the "Start/Stop" indicator will flash. ^ Select a wash program using the program selection buttons (16). The selected program indicator will light and the "Start/Stop" indicator will flash. The run time of the program selected will appear in the time display (18) in hours and minutes. The "Time left" indicator will light.
Operation Waterproof System At the end of a program All Miele dishwashers are specially designed to shut off the water intake and drain the wash cabinet in the rare event of an internal water valve failure. The "End" indicator will light and 0 will appear in the time display (18). For this feature to be active, the machine must be "On" (not necessarily running), and the door must be closed.
Operation Interrupting a program Changing a program A program is interrupted as soon as the door is opened. If the door is closed, the program will continue from where it was interrupted. If the selected program has not yet started: ,Water in the dishwasher may be hot. There is a danger of being burned! Only open the door if absolutely necessary. ^ Press the "Start/Stop" button (21) for at least one second. ^ Press the program button (16) of the desired program.
Operation Program guide Program Pots & Pans Sani Wash Normal Plus Normal 1) When to use Program cycle Pre- Main Interim Final Drywash wash rinse rinse ing 1 2 1 2 X X X X for heavily soiled pots and pans with dried on food X X Main wash temperature 170 °F (75 °C) Run-time 128 min X X X X X extended wash time, for sanitizing normally soiled - X dishware with dried on food Main wash temperature 150 °F (65 °C) Run-time 142 min X X X X X X higher wash temperature helps to clean normally soiled dishware w
Operation Additional features "Top Solo" (20) Using "Top Solo" will save water and energy. ^ Turn the dishwasher on using the "On/Off" button (15). This program is recommended when there is only a small load to clean. "Top Solo" can be selected with all programs. All program indicators will light and the "Start/Stop" indicator will flash. With this feature water is directed only to the top and middle spray arms in the dishwasher.
Operation Delay Start (19) The start time of a program can be delayed from 30 minutes to 24 hours. ^ Turn on the dishwasher with the "On/Off" button (15). A delay start time between 30 minutes and 9 hours and 30 minutes is set in 30 minute intervals. For 10 hours or more it is set in one hour periods. ^ Select a program with the selection buttons (16). When using delay start, make sure the detergent compartment is dry before adding detergent. Wipe dry if necessary.
Operation Once the "Delay start" period has elapsed, the selected program will begin automatically. The time display shows the time left for a program to run, the "Delay start" indicator goes out and the "Time left" indicator will light. To start a program before the delay start period has elapsed: How the delay start time is displayed: ^ Press the button of the desired program. up to 59 minutes example - 30 minutes = 30 between 1 hour and 9 hours 30 minutes example - 5 hours = 5.
Operation Extended drying If desired drying results are not consistently achieved, the turbothermic cooling fan can be programmed to run an extra 14 minutes at the end of each program. The "Extended drying" feature can also be activated to prevent condensation from collecting on the steam deflector. Turning extended drying on/off ^ Turn off the dishwasher. ^ Press and hold the & (19) and "Start/Stop" (21) buttons and at the same time turn the dishwasher on using the "On/Off" button. Release all buttons.
Frequently asked questions With the aid of the following guide, minor problems can be fixed without a service call. ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. What if … Possible fault Fix the program does not start? The door is not properly closed. The machine is not plugged in. The fuse is defective or the breaker has tripped. Close the door firmly.
Frequently asked questions What if … Possible fault the "Intake/Drain" indi- The water valve is closed. cator is lit or flashing. The filter in the water inlet The dishwasher may is blocked. have stopped? The flow pressure at the water inlet is less than 4.5 psi (0.3 bar). The waterproof system has activated. Fix Open the water valve. See maintenance instructions. Contact a plumber. Call the Miele Technical Service Department. the "Intake/Drain" indi- The intake water has not – Start the program again.
Frequently asked questions What if … Possible fault Fix the "Drain" indicator flashes, the program stops? The triple filter in the wash cabinet is clogged. The drain pump or the non-return valve may be blocked. The drain hose is kinked. Clean the filter, see maintenance instructions. Clean the drain pump and the non-return valve, see maintenance instructions. Remove the kink.
Frequently asked questions What if … Possible fault Fix there is a knocking noise in the wash cabinet? The spray arm is hitting an item in the basket. Interrupt the program, rearrange items blocking the spray arms. there is a rattling noise? Items are not secure in the wash cabinet. Interrupt the program and rearrange loose pieces. there is a knocking noise in the water pipes? dishes are not dry, glasses and cutlery are spotted? This may be caused by the installation or the diameter of pipe.
Frequently asked questions What if … Possible fault tea or lipstick stains have not been completely removed? The wash temperature of Select a program with a the selected program was higher temperature. too low. white residue is visible on cutlery and dishes, clouding occurs on glassware and film can be wiped off? Fix Not enough detergent Use more detergent. was used. Not enough rinse aid was Increase the dosage, used. see "Before using for the first time".
Frequently asked questions What if … Possible fault Fix plastic items are discolored? Natural dyes e. g. from vegetables may be the cause. Not enough detergent was used to break down natural dyes. The salt reservoir cap was not screwed on properly. The affected items are not corrosion resistant. Use more detergent, see "Adding detergent". Discoloration is permanent.
After sales service In the event of a fault which you cannot correct yourself please contact: – Your Miele Dealer or Program update function - PC The Program Correction (PC) allows a technician to update the dishwasher to make use of new technology. – The Miele Technical Service Department. USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca When contacting the Miele Technical Service Department, please quote the model and serial number of your appliance.
Transport To transport the dishwasher, e. g. when moving to a new home, note the following: – Empty the dishwasher. – Secure any loose parts, e. g. hoses, cables, cutlery baskets. – Transport the dishwasher in the upright position. If unavoidable it may be transported on its back. Do not transport it on its side or on the door. Residual water in the machine could leak and cause electrical damage.
User Maintenance Instructions To prevent accidents and machine damage, read these instructions before installation or use.
Triple filter system The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones). Cleaning the filter in the wash cabinet ^ Turn off the dishwasher before cleaning. The filter system must be cleaned every 4 - 6 months or whenever a foreign objects is trapped.
To clean the underside of the filter, the flap must be opened: ^ Return the filter so that it lies flat in the base of the wash cabinet. ^ Pull back the yellow clip. ^ Lock the filter by turning the handle clockwise. ^ Rinse all parts under running water. Scrub with a nylon brush if necessary. ^ Close the flap so that the clip engages. ,The dishwasher must not be used without the filter in place. Make sure the filter is locked in place. Otherwise untrapped debris will redeposit on dishes.
Cleaning the spray arms ^ Remove the lower basket. Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before cleaning. Remove the spray arms as follows: ^ Remove the cutlery tray (if present). ^ Press the top spray arm upwards to engage the inner ratchet and unscrew the spray arm. ^ Pull the lower spray arm firmly upwards to remove.
Cleaning the wash cabinet Generally, the wash cabinet is self cleaning if the correct amount of dishwasher detergent is used. The wash cabinet can be cleaned with a dishwasher cleaner such as Dis Cleaner available from your Miele dealer or the Miele Technical Service Department. Cleaning the door and door seal ^ Wipe the door seal with a damp cloth to remove any food particles. ^ Food residue and spilt liquids should be wiped from the sides of the dishwasher door.
Cleaning the water inlet filter A filter is incorporated in the intake hose attached to the dishwasher’s shut off valve. If your water is hard, or the pipes contain sediment, this filter may clog and prevent enough water from entering the wash cabinet. Installing an in-line water filter ^ If your water contains a large number of insoluble substances, a filter between the water valve and the intake hose connection is recommended. These filters can be purchased from Miele’s Technical Service Department.
Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher. ^ Remove the triple filter (see "Cleaning the filter in the wash cabinet"). ^ Use a jug or bowl to scoop water out of the wash cabinet. ^ Pull out the non-return valve and rinse well under running water. ^ Tilt the locking clamp to the side. The drain pump is beneath the non-return valve (see arrow).
Alterations rights reserved / (G 698 / G 898 Plus) / 1403 This bio-friendly paper was bleached without the use of chlorine. M.-Nr.
