Operating instructions

What if … Possible fault Fix
the "Intake/Drain" indi
-
cator is lit or flashing.
The dishwasher may
have stopped?
The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked.
See maintenance instruc
-
tions.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
Contact a plumber.
The waterproof system has
activated.
Call the Miele Technical
Service Department.
the "Intake/Drain" indi
-
cator lights during the
"Energy Saver" pro
-
gram?
The intake water has not
reached the required tem
-
perature of 115 °F/45 °C,
the hot water system may
be overloaded, see "Pro
-
gram guide".
–
Start the program again.
–
If the indicator light co
-
mes on again, select a
different program.
Frequently asked questions
40