Specifications Sheet

Classic Plus 3D
Fully Integrated Dishwasher
Page 2 of 5
SPECIFICATIONS
Overall Unit Dimensions 23
9
/16” (598mm) W x 33
11
/16” - 36
1
/4” (855 - 920mm) H x 22
7
/16” (570mm) D
Niche
Minimum Cabinet Opening Dimensions
23
5
/8 ” (600mm) W x 33
3
/4” (857mm) H x 22
7
/16” (570mm) D
Plumbing
Water Supply Requirements
May be connected to a cold or hot water supply up to a maximum of 140°F/60°C. Must be
connected to a shut-off valve with a male 3/8” compression. The water shut-off valve must be
accessible after installation. The water pressure must be between 4.35 psi (0.3 bar) and may not
exceed 145 psi (10 bar). If the pressure is higher than 145 psi (10 bar), a pressure reducing valve
must be installed.
Water Connection Line 4’ 11” (1.5m) flexible water intake hose is supplied with a 3/8 compression connection.
Drain Hose 4’ 11” (1.5m) flexible drain hose is supplied.
Electrical
Electrical Requirements - Volts/Amps 110V / 120V, 60Hz, 15 Amps
Power Cord - Plug and length NEMA 5-15 plug, 3’ 11” (1.2m) (Measured from back of unit, Convertible to Hardwire)
Shipping
Shipping Weight 118 lbs (53.5kg)
Support
Call Miele [phone]
Miele Website
8www.mieleusa.com
20/20 Link
82020technologies.com
Classic Plus 3D
Fully Integrated Dishwasher