Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Notes on the operating instructions
- Scope of delivery
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the Settings menu
- Changing settings
- Closing the Settings menu
- Language
- Water hardness
- Rinse Aid
- Miele@home
- Remote control
- Remote update
- Display brightness
- Buzzer
- Refill reminders
- AutoOpen
- Extra clean
- Extended drying
- BrilliantLight
- Software version
- Showroom program
- Factory default
- Copyrights and licenses for the communication module
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Program options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Options
60
After you have activated the timer, all
the displays will turn off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
Open the door if you need to check
how long the timer has left to run.
The time up until the program starts will
count down in the display in hours for
durations above 10hours, and in min-
utes for durations below 10hours.
At the end of the delay period, the pro-
gram selected begins automatically.
The time left will appear in the display
and the Timer indicator light will go
out.
Changing or deleting the timer time
You can change the time set for the
timer or delete it.
Open the door.
Press the Timer button.
Use the buttons to select the
Change or Delete function and confirm
with OK.
After confirming the Change function
with OK, you can change the time set
for the timer.
After confirming the Delete function with
OK, the cycle time of the selected pro-
gram will appear in the display.
The indicator light next to the program
selected will come on.
You can now start a program or turn the
dishwasher off.
Turning the dishwasher off while a timer
is running stops the timer.