Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the dishwasher 8
- Caring for the environment 10
- Before using for the first time 11
- Loading the dishwasher 20
- Optional accessories 33
- Use 34
- Additional options 44
- Settings ! 47
- RemoteVision 56
- Frequently asked questions 57
- After sales service 67
- Transport 68
- User Maintenance Instructions 69
- Cleaning and Care 70
- Installation instructions 77
- Help to protect the environment 78
- Electrical connection 79
- Plumbing 81
- Noise measurement 83
Poor cleaning results
Problem Possible fault Solution
The dishes are not
clean.
The dishes were not
loaded correctly.
See "Loading the
dishwasher".
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Not enough detergent was
dispensed.
Use more detergent, or
change the detergent.
The spray arms are
blocked.
Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash
cabinet is clogged or not
correctly inserted.
The spray arm jets might
be clogged as a result.
Clean the filter and insert it
correctly. Clean the spray
arm jets, if required (see
"Cleaning and care").
The non-return valve is
stuck open and blocked.
Wash water will run back
into the wash cabinet.
Clean the drain pump and the
non-return valve (see
"Cleaning and care").
Glasses and cutlery
show streaks. The
glasses take on a
bluish shimmer; the
deposits can be
wiped off.
The rinse aid dosage is
set too high.
Reduce the dosage (see
"Settings - Rinse aid").
Frequently asked questions
64