Operating instructions

Problem Possible cause Remedy
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
One of the following
messages appears in
the display:
Before rectifying the
problem:
–
Switch the dishwasher off
using the On/Off button
K.
; Technical fault FXX
There may be a
technical fault.
After a few seconds:
–
Switch the dishwasher
back on.
–
Select the programme you
want.
– Close the door.
If the fault message appears
again, there is a technical
fault.
– Call the Service
Department.
Waterproof F70
The Waterproof system
has reacted.
– Close the stopcock.
– Call the Service
Department.
Fault with auto. door
closing
The door is sometimes
obstructed by an item
inside the appliance.
– Remove the obstruction.
–
If this is not the case, call
the Miele Service Dept.
Fault with auto. door
opening
There may be a
technical fault.
–
Open the door manually.
–
Call the Service
Department.
Problem solving guide
60