Operating Instructions

Settings menu
71
If the time of day display has been
switched off (see "Settings menu,
Time"), the display message will go
out after 10minutes following activa-
tion of a delay start time.
To switch the display message back
on for a few minutes, press the 
sensor.
If you open the door and then close it
again before you have started a pro-
gram with the remote control, the
message Press Start to continue ap-
pears in the display. Press the Start
button to reactivate the MobileControl
function.
If you now do not wish to operate the
dishwasher remotely with the
Miele@mobile app, you can cancel the
MobileControl function.
 Select Cancel and confirm with Yes.
Module settings
We recommend connecting your dish-
washer to your WLAN network using
the Miele@mobile app or via WPS.
If you would rather set up the connec-
tion to your router yourself, or you have
a special network configuration, you
can enter the relevant settings with the
necessary technical knowledge.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can re-
store the factory default settings on
your WLAN module. Any settings which
do not affect Miele@home will remain
unchanged.
 Select Restart w. default settings and
confirm with OK.
Please wait... will appear in the display.
The message Restart successful will ap-
pear in the display after a few minutes.
 Confirm the message with OK.
The WLAN module factory default set-
tings have been restored.
If the factory default settings were not
restored to your WLAN module, repeat
the instructions above.