User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- Using for the first time
- Caring for the environment
- Loading the dishwasher
- Comparison tests
- Detergents
- Operation
- Options
- Programme chart
- Programme options
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Installation
- Technical data
- Settings
- Opening the Settings menu
- Changing settings
- Closing the Settings menu
- Language
- Time of day
- Water hardness
- AutoDos (automatic dispensing)
- Rinse aid
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Consumption (EcoFeedback)
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Extra clean
- Extra dry
- Software version
- Showroom programme
- Factory default
Cleaning and care
76
Cleaning the AutoDos
You should check that the detergent
chute is clean every time you replace
the PowerDisk, and clean it if
necessary. This helps keep the
AutoDos working properly.
In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed.
1 PowerDisk holder
2 Detergent chute for dispensing the
detergent from the PowerDisk into the
wash cabinet
Slide the yellow catch of the AutoDos
lid to and open the lid.
Remove the PowerDisk if applicable.
Pull the PowerDisk holder upwards
by the yellow tabs and remove it.
When doing so, do not pull on the
side tab.
Use the tab (see arrow) to release
the detergent chute and pull it out.