Operating Instructions
Options
49
After you have activated the timer, all
the displays will turn off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
Open the door if you need to check
how long the timer has left to run.
The time up until the program starts will
count down in the display in hours for
durations above 10hours, and in min-
utes for durations below 10hours.
At the end of the delay period, the pro-
gram selected begins automatically.
The time left will appear in the display
and the Timer indicator light will go
out.
How the time for the timer is shown
in the display:
Up to 59minutes:
e.g., 30minutes=:
1hour up to 9hours 30minutes:
e.g., 5hours=:
Over 10hours:
e.g., 15hours=
Starting a program before the time
for the timer has elapsed:
A program can be started before the
time for the timer has elapsed.
Proceed as follows:
Open the door.
Turn the dishwasher off with the
button.
Turn the dishwasher on again with the
button.
Select the program you want.
Start the program by closing the
door.
The in-operation indicator light comes
on to show that a program has been
started.