Operating Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time of day
- Water hardness
- AutoDos (AutoDos)
- Rinse Aid
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Extra Clean
- Extra Dry
- 2nd interim rinse
- Knock2open
- BrilliantLight
- Hygiene cycle
- Software version
- Showroom program
- Factory default
- Copyrights and licenses for the communication module
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Program options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Before using for the first time
26
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Automatic dis-
pensing/AutoDos” under “Detergent”).
Even if you do not wish to use Auto-
Dos, you must remove the transport
locking device from the PowerDisk
compartment before running the first
program (see “Activating AutoDos”
under “Detergent”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Manual detergent dispensing” under
“Detergent”).
Select the setting you want and con-
firm with OK.
This setting applies to all programs and
you can change it at any time using the
AutoDossensor button.
Finally, prompts will appear in the dis-
play.
After confirming these prompts with
OK, the messages Refill salt and
Add rinse aid may appear.
Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Before using for the first
time”).
Select OK to confirm the messages.
The program selected will appear briefly
in the display and the appropriate sen-
sor button will be illuminated.
The display will then show the esti-
mated program duration for the pro-
gram selected.