Operation Manual

Energy saving functions
If preferred you can
– programme the appliance so that
the display is not as bright at night
(“Night time dimming” function),
– switch off the oven compartment
light.
“Night time dimming” function
When this function is switched on the
display is programmed to be less
bright during the hours between 10 pm
and 6 am (22.00 to 6.00 hours).
How to activate this function:
The function selector switch must
be at Position “0".
Press and hold the “+” and Enter
touch controls and turn the function
selector switch one position to the
right.
“01:0" will appear in the display area.
The control lamps for the “– /+” and
Enter touch controls will light up.
Press the Enter touch control.
“01:1" will appear in the display area.
Turn the function selector switch to
Position “0" again.
The function will remain activated until
you switch it off again. It will also re-
main activated even if there is a power
cut.
How to switch this function off again:
The function selector switch must
be at Position “0".
Press and hold the "+" and Enter
touch controls and turn the function
selector switch one position to the
right.
“01:1" will appear in the display area.
The control lamps for the “– /+” and
Enter touch controls will light up.
Press the Enter touch control.
“01:0" will appear in the display area.
Turn the function selector switch to Posi-
tion “0" again.
M
1
2
3
4
5
Energy saving functions
43