Operation Manual

. . . the timer display is dark when
the appliance is first switched on.
This is not a fault.
If the time of day has been switched
off, the display stays dark.
If the "f" and ")" buttons are
pressed at the same time "12:00" ap-
pears in the display field.
. . . the time of day cannot be entered
after a power cut.
This is not a fault.
Check whether the oven function selec-
tor was still set to one of the functions.
If it was, turn it to "0".
The time of day can now be entered.
. . . The energy-save function is not
activated when cooking with the
roast probe or the timer.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling the energy-
save function comes into operation.
Sometimes these do not occur.
. . . The residual time indicator is not
activated when cooking with the
roast probe.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling residual time
comes into operation. Sometimes these
do not occur.
Correcting minor faults
69