Operation Manual

Electrical connection
Q\}
All electrical work should be under-
taken by a suitably trained and com-
petent person in strict accordance
with national and local safety regula-
tions.
The voltage and rated load are given
on the data plate, visible below the
oven interior, with the oven door open.
Please ensure that these match the
household mains supply. Please quote
these data, and the model and serial
number when contacting the Miele Ser-
vice dept.
Connection of this appliance should be
made either via a fused connection unit
(rated load under 3000 W), or via a suit-
able isolator (rated load over 3000 W),
which complies with national and local
regulations, and which is accessible
after the appliance has been built in.
Important U.K.
The "B" model is supplied with a 3-core
cable for connection to a single phase
230-240 volt 50 Hz supply, with 20 amp
fusing.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
WARNING
THIS APPLIANCE MUST BE
EARTHED.
In other countries check these details
with your supplier.
Electrical connection
Q\}
72