Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Oven controls
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- Perforated gourmet baking tray HBBL 71
- Baking stone HBS 70
- Round baking trays
- Grilling and roasting insert HGBB 71
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Catalytic enamelled liners
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Hob control elements
- Before using for the first time
- Overview of functions
- Energy saving tips
- Operation
- Clock/timer
- Baking
- Roasting
- Grilling
- Further applications
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Cleaning the catalytic enamelled back panel
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Removing the back panel
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
Before using for the first time
29
Before using for the first time
The oven must not be operated
until it has been correctly installed in
its housing unit.
Press and release the function and
temperature selectors if they are re-
tracted.
The time of day can only be changed
when the function selector is at0.
Set the time of day.
Setting the time of day for the
first time
The time of day is shown in the 24-hour
format.
After connecting the oven to the electri-
city supply, will flash on the dis-
play.
The time of day is set in segments: first
the hours, then the minutes.
Confirm withOK.
will light up and will flash.
While the symbol is flashing, con-
firm with OK.
The hours will flash.
Use or to set the hours.
Confirm withOK.
The hours are saved and the minutes
will flash.
Use or to set the minutes.
Confirm withOK.
The time of day is now saved.
The time of day can be displayed in
the 12-hour format by setting in
the settings menu to status(see
“Clock/timer – Changing settings”).