Operating instructions

Interrupting the process /
switching off the oven
Turn the oven function selector to "0".
The oven is switched off;
all processes / symbols are cancelled.
Exceptions:
– if the roast probe is connected, the
"e" symbol is lit.
– If a minute minder time has been en-
tered, the " l " symbol is lit and the
display shows the time counting
down.
Energy-save function
(Only upper oven
-
)
If you are programming a cooking pro-
cess using the timer, or if you are cook-
ing with the roast probe, the residual
heat is automatically used to save en-
ergy.
Shortly before the end of the cooking
time the oven heating switches off. The
letters "EC" in the display indicate that
the energy-save function is in operation.
The residual heat in the oven is suffi-
cient to complete the cooking process.
The cooling fan continues to run, as
does the hot air fan if a "Fan" setting
has been chosen.
Oven lighting
When the oven is in operation the oven
lighting goes out approx. 15 seconds
after pressing the last button, to save
electricity.
If you wish to switch the lighting
back on for a short time, press one
of the buttons.
The oven lighting goes on automatically
when an oven function has been se-
lected and the oven door is opened.
If preferred, you can set the oven light-
ing to come on automatically as soon
as an oven function has been selected,
(see the Section on "Programmable
functions").
Oven - use
20