Operating instructions

. . . "F" and a number appear in the
oven display.
This combination indicates a fault
When "F3" appears the core tem-
perature (roast) probe has a fault.
Remove the probe from its socket
and the message will disappear.
When "F6" appears the oven has
automatically switched itself off dur-
ing use. This is a safety feature to
protect the oven if it has been opera-
ting for an exceedingly long period.
The timing is different depending on
the oven setting selected.
The oven can be used again immedi-
ately by simply turning the oven func-
tion selector to "0" and then entering
the process again.
– If "F9", appears in the display, this
may mean that the maximum tem-
perature of the appliance has been
exceeded.
The appliance switches itself off auto-
matically. As soon as the tempera-
ture has fallen to an acceptable level
the fault message disappears. The
appliance switches itself on again
automatically.
If this fault message occurs repeated-
ly, please inform the Service dept.
Please quote the fault message.
– If any other fault message appears
in the display, this will need a service
visit. Please quote the fault message.
. . . the timer display is dark when
the appliance is first switched on.
This is not a fault.
If the time of day has been switched
off, the display stays dark.
If the "f" and ")" buttons are
pressed at the same time "12:00" ap-
pears in the display field.
. . . the time of day cannot be entered
after a power cut.
This is not a fault.
Check whether the oven function selec-
tor was still set to one of the functions.
If it was, turn it to "0".
The time of day can now be entered.
. . . The energy-save function is not
activated when cooking with the
roast probe or the timer.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling the energy-
save function comes into operation.
Sometimes these do not occur.
. . . The residual time indicator is not
activated when cooking with the
roast probe.
This is not a fault.
Certain conditions must be fulfilled be-
fore the system controlling residual time
comes into operation. Sometimes these
do not occur.
Correcting minor faults
59