Operation Manual

. . . there has been a power cut and
the time of day is flashing in the
display.
All pre-set times have been deleted
because of the power cut.
^
You will have to enter the cooking
processes again.
. . . an "F" and a number appear in
the display.
This combination indicates a fault.
–
"F 55":
the oven has automatically switched
itself off during use. This is a safety
feature to protect the oven if it has
been operating for an exceedingly
long period. The length of time
depends on the oven function
selected.
The oven can be used again immedi-
ately by simply turning the
programme selector to "0" and
entering the process again.
–
If any other fault message appears
in the display, you should call the
Service Dept.
Problem solving guide
69