Specification Sheet

Product and Cut-out Dimensions Page 2 of 2
H 4844 BP Chef Series Single 30
”
Oven
–
Classic Design DS 4045 Signature Handle
H
4844
BP
Chef
Series
Single
30
Oven
Classic
Design
DS
4045
Signature
Handle
H 4846 BP Chef Series Single 30” Oven – Europa Design DS 4042 Square Handle
Proud Undercounter Installation
Location Codes
A
–
Vent cut-out
(
min. 24" ² / 150 cm ²
)
p
ossible at rear or
p
latform of cabinet
(
)p
p
B – Cut-out for power cord (min. 1" 2 / 3 cm2)
C – 6 ft. (1.8 m) flexible power cord consisting of 4 wires ready for connection
to a dedicated 3 pole, 4 wire grounded power supply:
208 V, 60 Hz, 30 A fuse rating
240 V, 60 Hz, 30 A fuse rating
Ensure that the power outlet is accessible after installation
The silver data plate is located along the front side of the oven with the door open.
Notes
The oven must be installed into cabinetry and be supported from underneath.
Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer
and installer. Cabinet depth for flush installation is 25” also the inside edges of the rough opening must be finished.
When installed under a cooktop regard the installation instructions and dimensions of the cooktop
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 05252012