Unit installation

Problem Possible cause and remedy
The interior lamp is
not working.
^
Disconnect the appliance from the electricity supply:
Switch off and unplug at the socket, or disconnect the
fuse, or switch off at the isolator as appropriate.
^
Turn the lamp cover a quarter turn anti-clockwise to
release it and then pull it downwards to take it out.
^
Replace it with a new lamp (Osram 66725 AM/A, 230 V,
25 W, G9).
^
Refit the lamp cover and turn it clockwise to secure it.
^
Reconnect the appliance to the mains electricity supply.
Cakes and biscuits
are not cooked
properly after
following the times
given in the chart.
–
Check that the correct temperature has been set.
–
Check whether there has been a change to the recipe.
The addition of more liquid or more eggs makes a
moister mix which would need longer to cook.
Cakes / biscuits are
browning unevenly.
There will always be a slight unevenness. If browning is
very uneven check that the correct temperature was set
and that the correct shelf level was used.
With conventional heat V the material and colour of the tin
used plays an important role. Light coloured, shiny tins are
less suitable.
There are spots like
rust on the catalytic
surfaces.
When roasting on the rack, the circulating air sometimes
picks up spices, which are then deposited on the oven
interior walls. These residues are not removed by catalytic
cleaning, and should be removed while fresh with a mild
solution of hot water and washing-up liquid applied with a
soft brush.
A fault code
appears in the
displayF+a
number
You can rectify the following faults yourself:
–
Fault 55: Safety switch-off has been triggered.
The appliance will be ready for use again after it has
been switched off and then back on again.
For all other fault codes please contact the Miele Service
Department.
Problem solving guide
62