Operation Manual

Heating phase
The heating phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
–
"Rapid"
All the heating elements are switched
on together in order to heat the oven
up as quickly as possible to the
required temperature.
–
"Normal"
Only the heating elements for the
cooking function selected are
switched on.
Recommended temperature
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
^ Select the function you want and
change the temperature within the
range allowed.
Display
You can change the contrast or
brightness of the display with the ; or
? sensors.
The setting is represented by a bar with
seven segments. The middle setting is
displayed by a filled-out segment in the
middle of the bar.
NH H H TTTTT H H HN
To change the setting, move the filled-
out segment to the left or right.
Volume
Buzzer tones
You can change the volume of the
buzzer by using the ; or ? sensor to
move the filled-out segment to the left
or right. If none of the segments is
filled-out, all buzzers are switched off.
Keypad tone
You can change the volume of the
keypad tone which sounds each time a
sensor is touched, by using the ; or ?
sensor to move the filled-out segment
to the left or right. If none of the
segments is filled-out, the keypad tone
is switched off.
Settings
33