Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the oven
- Control panel
- Features
- Model numbers
- Data plate
- Items included
- Standard and optional accessories
- Shelf runners
- Baking tray, Roasting pan and Wire oven rack
- FlexiClip telescopic runners HFC 72
- Installing and removing the FlexiClip telescopic runners
- Perforated Gourmet baking tray HBBL 71
- Grilling and Roasting insert HGBB 71
- Round baking form HBF 27-1
- Gourmet Baking Stone HBS 60
- Gourmet Casserole Dishes HUB and Lids HBD
- Roast Probe
- Opener
- Miele Oven Cleaner
- Oven controls
- Oven safety features
- PerfectClean surfaces
- Self Clean ready accessories
- Before first use
- Settings
- Timer
- Guide to the modes
- Operating the oven
- Additional functions
- MasterChef
- Favorites
- Bake
- Roast
- Slow Roasting
- Broil
- Special Modes
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- Caring for the environment
- Electrical connection
- Installation diagrams
- Installing the oven
Settings
39
Calibrate temperature
Using temperature calibration the
temperature can be modified, in all
modes and MasterChef programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled the oven
temperature is much higher than
indicated in the display. If no segment is
filled the oven temperature is much
lower than indicated.
Select + or -, to adjust the
temperature calibration.
Confirm with OK.
Voltage
Setting the voltage (electrical version)
Select the desired voltage and
corresponding frequency.
Confirm with OK.
Showroom program
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo Mode
If you have demo mode activated
Demo mode active. The appliance will not
heat up will appear when you turn on
the oven.
– On
Press and hold OK for at least 4
seconds to activate demo mode.
– Off
Press and hold OK for at least 4
seconds to deactivate demo mode.
The oven can then be used as
normal.
Factory default
– Settings
Any settings that have been altered
will be reset to the factory default
setting.
– Favorites
All Favorites will be deleted.
– Default Temperature
Any default temperatures that have
been changed will reset to the factory
default settings.