Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the oven
- Control panel
- Features
- Model numbers
- Data plate
- Items included
- Standard and optional accessories
- Shelf runners
- Baking tray, Roasting pan and Wire oven rack
- FlexiClip telescopic runners HFC 72
- Installing and removing the FlexiClip telescopic runners
- Perforated Gourmet baking tray HBBL 71
- Grilling and Roasting insert HGBB 71
- Round baking form HBF 27-1
- Gourmet Baking Stone HBS 60
- Gourmet Casserole Dishes HUB and Lids HBD
- Roast Probe
- Opener
- Miele Oven Cleaner
- Oven controls
- Oven safety features
- PerfectClean surfaces
- Self Clean ready accessories
- Before first use
- Settings
- Timer
- Guide to the modes
- Operating the oven
- Additional functions
- MasterChef
- Favorites
- Bake
- Roast
- Slow Roasting
- Broil
- Special Modes
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- Caring for the environment
- Electrical connection
- Installation diagrams
- Installing the oven
IMPORTANT SAFETY INSTRUCTIONS
8
Reliable and safe operation of the oven can only be guaranteed if
it is connected to the power supply.
To guarantee the electrical safety of this appliance, continuity
must exist between the appliance and an effective grounding
system. This appliance must be grounded. Connect only to properly
grounded outlet. See “Electrical connection - GROUNDING
INSTRUCTIONS”. It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
Proper installation: Make sure that your appliance has been
installed correctly and that it has been grounded by a qualified
technician.
Before installation, make sure that the voltage and frequency
listed on the data plate correspond with the household electrical
supply. This data must correspond to prevent injury and machine
damage. Consult a qualified electrician if in doubt.
Before installation or service, disconnect the power supply to the
work area by
– removing the fuse,
– “tripping” the circuit breaker, or
– unplugging the unit. Pull the plug not the cord.
Extension cords do not guarantee the required safety of the
appliance (e.g. danger of overheating). Do not use an extension cord
to connect this appliance to electricity.
The oven is not to be operated until it has been properly installed
within cabinetry.
Danger of electric shock!
Under no circumstances open the outer casing of the appliance.
This appliance must not be used in a non-stationary location (e.g.
on a ship).