Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- Round baking trays
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Baking stone HBS 70
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Food probe
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
Warning and safety instructions
13
Accessories
Only use original Miele accessories. If other parts are used,
warranty, performance and product liability claims will be invalidated.
Miele will guarantee to supply functional spare parts for a
minimum of 10years and up to 15years following the
discontinuation of your oven.
The Miele gourmet oven dish HUB5000/HUB5001 (if available)
must not be inserted into shelf level1. This will damage the floor of
the oven. The lack of clearance will create an accumulation of heat
which can cause the enamel to crack or flake off. Never place a
Miele oven dish on the upper support of shelf level1 either as it will
not be secured by the non-tip safety notches. As a general rule, use
shelf level2.
Only use the Miele food probe supplied with the appliance. If it is
faulty, it must be replaced with a new original Miele food probe.
The plastic on the food probe can melt at very high temperatures.
Do not use the food probe when using the grill functions. Do not
store the food probe in the oven compartment when it is not being
used.
Remove all accessories as well as the runners and any extra
accessories such as FlexiClip runners from the oven interior before
starting the Pyrolytic cleaning programme.
The high temperatures needed for pyrolysis will damage them.