Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- Round baking trays
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Baking stone HBS 70
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Food probe
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
Operation
43
Setting cooking durations
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
When baking, the cake mixture or
dough can dry out, and the raising
agents can lose their effectiveness.
Select as short as possible a time
until the cooking programme starts.
You have placed the food in the oven
compartment, selected an operating
mode and the required settings such as
the temperature.
By entering Duration, Finish at or Start at
via the sensor control, you can
automatically switch the cooking
process off or on and off.
- Duration
Enter the required cooking duration
for the food. The heating will switch
off automatically once this duration
has elapsed. The maximum cooking
duration that can be set depends on
the operating mode that you have
selected.
- Finish at
Specify when you want the cooking
process to end. The oven heating will
switch off automatically at the time
you have set.
- Start at
This function will only appear in the
menu if you have set aDuration or
Finish attime. WithStart at, you have
to specify when you want the
cooking process to start. The oven
heating will switch on automatically
at the time you have set.
Select the sensor control.
Set the desired times.
Confirm with OK.
Touch the sensor control to return
to the menu for the selected
operating mode.
Changing the set cooking durations
Select the sensor control.
Select the desired time.
Confirm withOK.
Select Change.
Change the set time.
Confirm withOK.
Touch the sensor control to return
to the menu of the selected function.
These settings will be deleted in the
event of a power failure.
Deleting the set cooking durations
Select the sensor control.
Select the desired time.
Confirm withOK.
Select Delete.
Confirm withOK.
Touch the sensor control to return
to the menu of the selected function.
If you delete Duration, the set times for
Finish at and Start at are also deleted.
If you delete Finish atorStart at, the
cooking programme will start using
the cooking duration set.