Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- Round baking trays
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Baking stone HBS 70
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Food probe
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
Installation
*INSTALLATION*
82
Electrical connection
Danger of injury!
Installation, repairs and other
maintenance work by unqualified
persons could be dangerous. Miele
cannot be held liable for
unauthorised work.
The appliance may only be
connected to the mains electricity
supply by a qualified electrician who
is familiar with and complies with the
national regulations and any
additional regulations of the local
electricity provider.
The appliance must be connected to an
electrical system designed in
accordance with VDE0100.
Connection to a switched socket (in
accordance with VDE0701) is
recommended as this provides easier
access in the case of a service call.
If the appliance is hardwired or if the
plug is not accessible, an additional
means of disconnection must be
provided for all poles.
Suitable means of disconnection
include switches with an all-pole
contact gap of at least 3mm. These
include circuit breakers, fuses and
contactors (EN60335).
Connection data is given on the data
plate situated at the front of the oven
compartment. Please ensure the
connection data matches the
household supply.
When contacting Miele, please quote
the following:
- Model identifier
- Serial number
- Connection data (mains voltage/
frequency/maximum rated load)
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H05VV-F with a suitable cross-
sectional area (CSA) may be used.
Temporary or permanent operation on an
autonomous power supply system or a
power supply system that is not
synchronised with the mains power
supply (e.g. island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in this
Miele product must also be maintained in
isolated operation or in operation that is
not synchronised with the mains power
supply, or these measures must be
replaced by equivalent measures in the
installation. As described, for example, in
the current version of
BS OHSAS 18001–2 ISO 45001.
Oven
The wires in the mains lead are
coloured as follows:
Green/yellow = earth
Blue = neutral
Brown = live