Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 70
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
- Copyrights and licences
Cleaning and care
75
Clean the door panes and other parts
with a clean sponge and a solution of
hot water and washing-up liquid or a
clean, damp microfibre cloth.
Dry all parts with a soft cloth.
Then reassemble the door carefully:
The two middle panes are identical. To
help you put them back in correctly,
the material number is printed on the
panes.
Refit the lower of the two middle
panes in such a way that the material
number is legible (i.e. not reversed).
Flip both the glass pane retainers
inwards in such a way that they fit
over the lower of the two middle
panes.
Refit the upper of the two middle
panes in such a way that the material
number is legible (i.e. not reversed).
The pane must rest on the retainers.