Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 70
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
- Copyrights and licences
Problem solving guide
83
Problem Cause and remedy
The browning of the
baked goods is uneven.
The wrong temperature or shelf level was selected.
There will always be a slight unevenness in
browning. If browning is very uneven, check
whether the correct temperature and shelf level
were selected.
The material or colour of the bakeware is not suitable
for the oven function selected.
When using the Conventional heat function, light
coloured, shiny tins will not produce as desirable
results. Dark, matt tins are best for baking.
The FlexiClip runners do
not push in or pull out
smoothly.
The bearings in the FlexiClip runners are not
sufficiently lubricated.
Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven compartment. Other
lubricants may resinify when heated and will gum
up the FlexiClip runners. You can obtain the
special Miele lubricant from your Miele dealer or
from the Miele Customer Service Department.
There is still soiling in
the oven compartment
after a pyrolytic clean-
ing programme.
The pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
Remove the ash using a damp microfibre cloth or
with a clean sponge and a solution of hot water
and washing-up liquid.
If there is still coarse soiling left in the oven after
the pyrolytic cleaning programme you should start
the programme again, selecting a longer duration if
necessary.
The oven interior light-
ing switches off after a
short time.
You have selected theLighting| “On” for 15 seconds
setting.
If you want the oven interior lighting to be
switched on during the entire cooking programme,
select theLighting| On setting.