Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Controls
16
Sensor controls under the display
Sensor
control
Function
If you want to control the oven from your mobile device, you
must have the Miele@home system, switch on the Remote
controlsetting and touch this sensor control. The sensor control
then lights up and the MobileStart function is available.
As long as this sensor control is lit, you can control the oven via
your mobile device (see “Settings – Miele@home”).
After selecting manual steam injection for the Moisture plus
function, you can use this sensor control to inject steam.
This sensor control lights up orange as soon as steam injection
becomes possible.
appears in the display while steam injection is in progress.
Depending on which menu you are in, this sensor control will
take you back a level or back to the main menu.
If a cooking programme is in progress at the same time, use this
sensor control to cancel the programme.
In the navigation area, use the arrow buttons or the area
between them to scroll up or down in the selection lists. The
display shows the menu option that you want to select.
You can change the values and settings using the arrow buttons
or the area between them.