Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Using the appliance
18
Use the and arrow buttons or the
area between them in the
navigation area to use the oven.
As soon as you reach a confirmable
value, message or setting, theOK
sensor control will light up orange.
Selecting a menu option
Touch the or arrow buttons or
swipe to the right or left in the
area until you reach the
desired menu option.
Tip: If you press and hold an arrow
button, the list continues scrolling
automatically until you release the arrow
button.
Confirm your selection withOK.
Changing a setting in a list
A tick will appear beside the current
setting.
Touch the or arrow buttons or
swipe to the right or left in the
area until you reach the
desired value or setting.
Confirm withOK.
The setting is now saved. This will take
you back to the previous menu.
Changing the setting with a
segment bar
Some settings are represented by a bar
with seven segments. If all
of the segments are illuminated, the
maximum value is selected.
If none of the segments are illuminated,
or only one of them is, the minimum
value is selected or the setting is
switched off altogether (e.g. volume).
Touch the or arrow buttons or
swipe to the right or left in the
area until you reach the
desired setting.
Confirm your selection withOK.
The setting is now saved. This will take
you back to the previous menu.