Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Using the appliance
19
Selecting a function or
operating mode
The sensor controls for the functions
and operating modes (e.g. Further)
are located above the display (see
“Controls” and “Settings”).
Touch the sensor control for the
desired function.
The sensor control on the fascia panel
lights up orange.
For functions and operating modes:
set values such as the temperature.
Under Further: scroll through the
lists until you reach the desired menu
option.
Confirm withOK.
Changing the function
You can change to another function
during a cooking programme.
The sensor control for the previously
selected function lights up orange.
Touch the sensor control of the new
function or operating mode.
The new function appears in the display
with its corresponding recommended
values.
The sensor control for the new function
lights up orange.
Under Further, scroll through the
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are
highlighted.
Touch the or arrow buttons or
swipe to the right or left in the
area until the desired number
is highlighted.
Tip: If you press and hold an arrow
button, the numbers continue scrolling
automatically until you release the arrow
button.
Confirm withOK.
The changed number is now saved.
This will take you back to the previous
menu.
Activating MobileStart
Select the sensor control to
activate MobileStart.
The sensor control lights up. You
can operate your oven remotely with the
Miele@mobile app.
Directly operating the oven takes
priority over operating it via the remote
control function on the app.
You can use MobileStart as long as
the sensor control is lit up.