Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Before using for the first time
30
Basic settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see “Settings”).
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, the oven may
only be used when it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply.
Setting the language
Select the desired language.
If you have selected the wrong
language by mistake, proceed as
described in “Settings – Language”.
Setting the location
Select the required location.
Setting up Miele@home
Set up Miele@homewill appear in the
display.
To set up Miele@home now, confirm
by touchingOK.
To set it up at a later date, selectSkip
and confirm withOK.
See “Settings – Miele@home” for
information on setting up at a later
date.
To set up Miele@home now, select
the desired connection method.
You will then be guided by the display
and the Miele@mobile app.
Setting the time
Set the time of day in hours and
minutes.
Confirm withOK.
Completing the commissioning
process
Follow any further instructions in the
display.
The oven is now ready for use.