Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Operation
47
Cancelling a cooking
programme
Touch the sensor control for the
selected function or the sensor
control.
When Cancel process appears in the
display, confirm withOK.
The oven compartment heating and
lighting will then switch off. Any cooking
durations set will be deleted.
The main menu will appear.
Pre-heating the oven
The Boosteris used in conjunction with
certain functions to quickly pre-heat the
oven.
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in the
cold oven to make use of the heat
produced during the heating-up
phase.
Pre-heat the oven when cooking the
following food with the following
functions:
- Dark bread dough as well as beef
sirloin joints and fillet with the Fan
plus, Moisture plus and
Conventional heat functions
- Cakes and pastries with a short
cooking duration (approx. 30minutes
or less) as well as delicate items (e.g.
sponge) with the Conventional heat
function (without the Booster function)
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment.
This function is switched on as the
factory default setting for the following
functions (Further| Settings|
Booster| On):
- Fan plus
- Conventional heat
- Auto roast
- Moisture plus
If you set a temperature above 100°C
and the Boosterfunction is switched on,
a rapid heating-up phase heats the
oven compartment to the set
temperature. The top heat/grill element
and the ring heating element come on
together with the hot air fan.
Delicate items (e.g. sponge or
biscuits) will brown too quickly on the
top if the Boosterfunction is used.
Switch off the Boosterfunction for
these items.
Switching off theBooster for a
cooking programme
Select the Booster| Offsetting before
selecting the desired function.
The Boosterfunction is switched off
during the heating-up phase. Only the
heating elements associated with the
function are pre-heating the oven
compartment.
If you then want to restart a cooking
programme with the Boosterfunction,
select the Booster| Onsetting to
switch the function on again.