Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Cleaning and care
66
Pyrolytic cleaning of the oven
compartment
Instead of cleaning the oven
compartment manually you can run the
Pyrolytic function.
During pyrolytic cleaning the oven
compartment reaches temperatures in
excess of 400°C. Any residual soiling is
burnt off and turned to ash by the high
temperatures.
There are 3pyrolytic settings available,
each with a different duration:
- Level1 for light soiling
- Level2 for heavier soiling
- Level3 for very heavy soiling
The oven door is automatically locked
when the pyrolytic cleaning process is
started. It cannot be opened until after
the programme has finished.
The timer can be used to delay the start
time of the pyrolytic cleaning
programme, for instance to make use of
cheaper electricity tariffs.
At the end of the pyrolytic cleaning
programme any residues such as ash
from the pyrolytic process, which are
formed depending on the oven
compartment’s degree of soiling can be
easily wiped away.
Preparing for pyrolytic cleaning
Accessories will be damaged by the
high temperatures in pyrolytic
cleaning.
Remove all accessories from the
oven before starting the pyrolytic
cleaning programme. This also
applies to the side runners and any
optional accessories.
Coarse soiling in the oven can cause
thick smoke to develop.
Burnt-on residues can cause lasting
discolouration or dull spots on
enamelled surfaces.
Before starting the pyrolytic cleaning
programme, remove coarse soiling
from the oven and scrape any burnt-
on residues off enamelled surfaces
with a glass scraper.
Remove any accessories from the
oven compartment, including the side
runners.