Operating instructions/Installation instructions

Warning and safety instructions
8
 If the connection cable is damaged, it must be replaced with a
special connection cable by a Miele authorised service technician (see
“Installation”, “Electrical connection”).
 During installation, maintenance and repair work, e.g. if the oven
interior lighting is faulty (see “Problem solving guide”), the oven must
be completely disconnected from the household electricity supply.
To ensure this, do one of the following:
- Disconnect the mains fuse
- Completely unscrew the screw-out fuse (in countries where this is
applicable)
- Pull out the plug (if one is present) at the wall socket To do this,
pull the plug and not the mains connection cable.
 The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g. by fitting heat insulation strips in the housing unit).
Furthermore, the required supply of cool air must not be excessively
heated by other heat sources (e.g. solid fuel stoves).
 If the oven is built in behind a furniture front (e.g. a door), do not
close the furniture door while the oven is in use. Heat and moisture
can build up behind the closed furniture door. This can result in
damage to the oven, housing unit and floor. Leave the furniture front/
door open until the oven has cooled down completely.
Correct use
 Risk of injury caused by hot surfaces. The oven gets hot during
operation. You could burn yourself on the heating elements, oven
compartment, accessories or food.
Wear oven gloves when placing hot food in the oven or removing it and
when adjusting oven shelves, for example, in a hot oven compartment.
 Due to the high temperatures radiated, objects left near the oven
could catch fire. Do not use the oven to heat up the room.