Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Problem solving guide
81
Problem Cause and remedy
The sensor controls do
not respond.
You have selected the Display| QuickTouch| Off setting.
When the oven is switched off, the sensor controls do not
respond.
As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor controls to
respond even when the oven is switched off, select the
Display| QuickTouch| On setting.
The oven is not connected to the power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the On/Off sensor control until
the display switches off and the oven restarts.
Power cut appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00 appears in the dis-
play.
The power supply was interrupted for longer than
150hours.
Reset the time and date.
Max. op. hours reached ap-
pears in the display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
Confirm withOK.
The oven is now ready to use.
FaultF32 appears in
the display.
The door lock for pyrolytic cleaning has not locked.
Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
If the message appears again, contact the Miele
Customer Service Department.
FaultF33 appears in
the display.
The door lock for pyrolytic cleaning has not opened.
Switch the oven off and then back on again.
If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.