Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Data plate
- Scope of delivery
- Accessories supplied and available to order
- Side runners
- Baking tray, universal tray and rack with non-tip notches
- FlexiClip runners HFC 70-C
- Fitting the FlexiClip runners
- Removing the FlexiClip runners
- FlexiClip runners HFC 71
- Fitting and removing FlexiClip runners
- Grilling and roasting insert HGBB 71
- Perforated gourmet baking tray HBBL 71
- Round baking trays
- Baking stone HBS 60
- HUB gourmet oven dishes HBD gourmet oven dish lids
- Handle HEG
- Accessories for cleaning and care
- Safety features
- PerfectClean treated surfaces
- Before using for the first time
- Settings
- Min. minder
- Main and sub-menus
- Energy saving tips
- Operation
- Moisture plus
- Automatic programmes
- Further applications
- Baking
- Roasting
- Grilling
- Cleaning and care
- Unsuitable cleaning agents
- Removing normal soiling
- Removing stubborn soiling (excluding the runners)
- Stubborn soiling on the FlexiClip runners
- Pyrolytic cleaning of the oven compartment
- Descale
- Door removal
- Dismantling the door
- Fitting the door
- Removing the side runners with FlexiClip runners
- Lowering the top heat/grill element
- Problem solving guide
- Service
- Installation
- Cooking charts
- Notes for test institutes
- Conformity declaration
Problem solving guide
82
Problem Cause and remedy
Faultand a fault code
not listed here appears
in the display.
A fault has occurred that you cannot resolve.
Call the Miele Customer Service Department.
This function is not available
at the moment appears in
the display after select-
ing the Descale func-
tion.
The steam injection system is faulty.
Call the Miele Customer Service Department.
Programmes that use
added moisture are not
taking in water.
Demo mode is active. You can select menu options
in the display and the sensor controls, but the pump
for the steam injection system is not working.
Deactivate Demo mode by selecting Settings|
Showroom programme| Demo mode| Off.
The pump for the steam injection system is faulty.
Call the Miele Customer Service Department.
A noise can be heard
after a cooking pro-
gramme.
The cooling fan remains switched on after a cooking
programme (see “Settings – Cooling fan run-on”).
The oven has switched
itself off.
To save power, the oven switches off automatically if
a button is not pressed after a certain amount of time
or after a cooking programme has ended.
Switch the oven back on.
Cakes/biscuits are not
cooked properly after
the duration given in the
cooking chart.
A different temperature from the one given in the
recipe was used.
Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
Check whether you amended the recipe. The
addition of more liquid or more eggs makes a
moister mix which requires a longer cooking
duration.